Below are most of the required torque values for the B5 Audi platform. If you feel that there is something missing or incorrect, don't hesitate to reach out to us!
| Category | Part | Torque | Converted | Plus |
| Body | Bumper Bolts | 23 Nm | 17.0 ft-lb | |
| Body | Front Bumper Support | 45 Nm | 33.3 ft-lb | |
| Brake | Front Ribbed Brake Bolt | 200 Nm | 148.0 ft-lb | |
| Cylinder Head | Camshaft Bearing Caps And Camshaft Adjuster To Head | 10 Nm | 7.4 ft-lb | |
| Cylinder Head | Coilpack To Valve Cover | 10 Nm | 7.4 ft-lb | |
| Cylinder Head | Hall Sensor Housing Bolt To Head | 10 Nm | 7.4 ft-lb | |
| Cylinder Head | Hall Sensor Rotor To Camshaft | 25 Nm | 18.5 ft-lb | |
| Cylinder Head | Timing Belt Backing Cover | 10 Nm | 7.4 ft-lb | |
| Cylinder Head | Toothed Belt Sprocket To Camshaft | 55 Nm | 40.7 ft-lb | |
| Cylinder Head | Valve Covers To Head | 10 Nm | 7.4 ft-lb | |
| Driveline | Flywheel | 60 Nm | 44.4 ft-lb | + 180° |
| Driveline | Pressure Plate | 22 Nm | 16.3 ft-lb | |
| Engine | Accessory Belt Tensioner | 45 Nm | 33.3 ft-lb | |
| Engine | Center Bolt To Crankshaft | 200 Nm | 148.0 ft-lb | + 180° |
| Engine | Fender Core Support | 10 Nm | 7.4 ft-lb | |
| Engine | Fuel Rail To Intake Manifold | 10 Nm | 7.4 ft-lb | |
| Engine | Idler Wheel Bolt (For Toothed Belt) | 45 Nm | 33.3 ft-lb | |
| Engine | Intake Manifold To Head | 10 Nm | 7.4 ft-lb | |
| Engine | Mechanical Fan Pulley Bracket 5 Mm Allen | 10 Nm | 7.4 ft-lb | |
| Engine | Mechanical Fan Pulley Bracket 6 Mm Allen | 25 Nm | 18.5 ft-lb | |
| Engine | Oil Drain Plug | 30 Nm | 22.2 ft-lb | |
| Engine | Oil Drain Plug | 40 Nm | 29.6 ft-lb | |
| Engine | Oil Filler Plug | 40 Nm | 29.6 ft-lb | |
| Engine | Power Steering Pulley To Bracket | 25 Nm | 18.5 ft-lb | |
| Engine | Power Steering Pump To Engine | 25 Nm | 18.5 ft-lb | |
| Engine | Pulley To Crankshaft | 20 Nm | 14.8 ft-lb | |
| Engine | Snub Mount Bolts | 25 Nm | 18.5 ft-lb | |
| Engine | Spark Plugs | 25 Nm | 18.5 ft-lb | |
| Engine | Thermostat | 10 Nm | 7.4 ft-lb | |
| Engine | Toothed Belt Tensioner | 10 Nm | 7.4 ft-lb | |
| Engine | Toothed Belt Tensioning Roller | 20 Nm | 14.8 ft-lb | |
| Engine | Water Pump To Block | 10 Nm | 7.4 ft-lb | |
| Exhaust | Downpipes To Turbo | 25 Nm | 18.5 ft-lb | |
| Exhaust | Exhaust Manifold To Head | 25 Nm | 18.5 ft-lb | |
| Exhaust | Oxygen Sensor | 50 Nm | 37.0 ft-lb | |
| General | M10 | 45 Nm | 33.3 ft-lb | |
| General | M12 | 60 Nm | 44.4 ft-lb | |
| General | M6 | 10 Nm | 7.4 ft-lb | |
| General | M8 | 20 Nm | 14.8 ft-lb | |
| Intake | Bipipe To Cylinder Head | 10 Nm | 7.4 ft-lb | |
| Rear Differential | Rear - Oil Drain Plug | 35 Nm | 25.9 ft-lb | |
| Rear Differential | Rear - Oil Filler Plug | 35 Nm | 25.9 ft-lb | |
| Rear Differential | Rear Final Drive Front Crossmember To Body (M10) | 40 Nm | 29.6 ft-lb | |
| Rear Differential | Rear Subframe To Body | 110 Nm | 81.4 ft-lb | + 90° |
| Suspension | Front Axel Bolt (M16) | 190 Nm | 140.6 ft-lb | + 180° |
| Suspension | Front Axle Bolt (M14) | 115 Nm | 85.1 ft-lb | + 90° |
| Suspension | Lower Cross Member To Subframe | 40 Nm | 29.6 ft-lb | + 90° |
| Suspension | Lug Bolts | 121 Nm | 89.5 ft-lb | |
| Suspension | Upper Spring Perch To Body Locknuts | 20 Nm | 14.8 ft-lb | |
| Transmission | # 1 - M12 X 90 | 65 Nm | 48.1 ft-lb | |
| Transmission | # 2 - M12 X 100 | 65 Nm | 48.1 ft-lb | |
| Transmission | # 3 - M10 X 60 | 45 Nm | 33.3 ft-lb | |
| Transmission | # 4 - M10 X 60 | 45 Nm | 33.3 ft-lb | |
| Transmission | # 5 - M10 X 150 | 65 Nm | 48.1 ft-lb | |
| Transmission | # 6 - M12 X 130 | 65 Nm | 48.1 ft-lb | |
| Transmission | # 7 - M12 X 80 | 65 Nm | 48.1 ft-lb | |
| Transmission | Bottom 3 Bolts | 45 Nm | 33.3 ft-lb | |
| Transmission | Drive Axle To Transmission (M8) | 40 Nm | 29.6 ft-lb | |
| Transmission | Driveshaft To Transmission | 55 Nm | 40.7 ft-lb | |
| Transmission | Engine Speed Sensor | 10 Nm | 7.4 ft-lb | |
| Transmission | Heat Shield | 25 Nm | 18.5 ft-lb | |
| Transmission | Leaf Spring Bolt | 25 Nm | 18.5 ft-lb | |
| Transmission | Slave Cylinder To Transmission | 20 Nm | 14.8 ft-lb | |
| Transmission | Transmission Mount To Subframe | 25 Nm | 18.5 ft-lb | |
| Transmission | Transmission Support To Transmission | 40 Nm | 29.6 ft-lb | |
| Turbos | Ac Compressor To Bracket (3X) | 25 Nm | 18.5 ft-lb | |
| Turbos | Exhaust Double Clamp Nut | 25 Nm | 18.5 ft-lb | |
| Turbos | Exhaust Manifolds To Turbo | 25 Nm | 18.5 ft-lb | |
| Turbos | Heat Shield To Downpipe/Cat | 10 Nm | 7.4 ft-lb | |
| Turbos | Oil Check Valve | 25 Nm | 18.5 ft-lb | |
| Turbos | Oil Check Valve Cover | 10 Nm | 7.4 ft-lb | |
| Turbos | Oil Line To Turbo | 15 Nm | 11.1 ft-lb |